| Width: | |
| Height: | |
| |
|
Features
|
|
Mount Type  | Mount Type | | Refers to the way in which the blind will be hung, either inside or outside the window opening. Inside mount blinds are mounted inside the window frame opening that is recessed from the wall. Outside mount blinds hang outside the window opening on a wood trim, wall. or door. Inside mount is by far the most popular mount and provides a nice clean look and finish to your window. |
| |
Tilter Location | Tilter Location | | Location of the cord or wand that is used to open and close the blinds. |
| |
Tilter Control | Tilter Control | Mechanism that controls the angle of the slats or vanes.
Cords allow the blinds to close tighter and are the more durable option. |
| |
Lift Cord Location | Lift Cord Location | Location of the cord that is pulled to raise and lower the blind.
|
| |
| |
| Options |
| 2 Blinds on 1 Headrail, for oversize blinds | |
| 2 Blinds on 1 Headrail, for oversize blinds |  2 blinds or shades mounted on the same headrail. Typically this is to cover a large window where the size is too large to allow a single shade. Each blind or shade on the headrail will have its own set of controls so one blind may be open while the other is closed. We recommend splitting very large wood and faux wood blinds (over 72" wide) into two or three blinds on one headrail. If it is recommended that your blind be split you can still choose to have it manufactured as one single blind, however, it will void the manufacturer's warranty. There will be approx. 1/4" gap between blinds. Please specify the size of each blind in the notes section of the shopping cart. |
|
20.00% |
| 3 Blinds on 1 Headrail, for oversize blinds | |
| 3 Blinds on 1 Headrail, for oversize blinds |  3 blinds or shades mounted on the same headrail. Typically this is to cover a large window where the size is too large to allow a single shade. Each blind or shade on the headrail will have its own set of controls so one blind may be open while the other is closed. We recommend splitting very large wood and faux wood blinds (over 72" wide) into two or three blinds on one headrail. If it is recommended that your blind be split you can still choose to have it manufactured as one single blind, however, it will void the manufacturer's warranty. There will be approx. 1/4" gap between blinds. Please specify the size of each blind in the notes section of the shopping cart. |
|
30.00% |
| Battery Operated Remote Control Tilt | |
| Battery Operated Remote Control Tilt | Our battery operated tilt, allows you to operate your blinds from up to 50 feet away. Motorization tilts, but does not lift the blinds.
You can operate an unlimited number of grouped blinds using a three channel remote control. In addition you can operate up to 3 blinds individually or operate all of your blinds simultaneously using the select all channel.
Since our units are battery operated this eliminates costly assembly and installation hassles. The motor is completly concealed in the headrail and out of sight.
Ideal for those hard to reach windows and for rooms filled with windows. |
|
$125.00 |
| Common Valance | |
| Common Valance | This feature allows you to order one valance to cover multiple blinds. Please indicate the size you wish your valance to be in the notes section of your order. In addition this manufacturer charges a shipping fee which is calculated in this total as well. Large valances may be spliced in the middle for easier shipping.
Note: 2 on 1 and 3 on 1 blinds come standard with a common valance. So this option does not need to be chosen. |
|
$20.00 |
| Routeless | |
| Routeless | 
Routless blinds have notches cut in the front and back of each slat as opposed to having routed holes for the lift cords. This provides superior privacy and better blocking light rays that come through the routed holes. Also each slat may be removed for cleaning. |
|
25.00% |
| Tile or Moulding Cutout(per cutout) | |
| Tile or Moulding Cutout(per cutout) | | Procedure where a portion of a blind is cut narrower than the rest of the blind. This might be needed where there is tile or molding that narrows a portion of a window opening. Price is per cutout. |
|
$20.00 |
