| Width: | |
| Height: | |
| |
|
Features
|
|
Mount Type  | Mount Type | | Refers to the way in which the blind will be hung, either inside or outside the window opening. Inside mount blinds are mounted inside the window frame opening that is recessed from the wall. Outside mount blinds hang outside the window opening on a wood trim, wall. or door. Inside mount is by far the most popular mount and provides a nice clean look and finish to your window. |
| |
Tilter Location | Tilter Location | | Location of the cord or wand that is used to open and close the blinds. |
| |
Lift Cord Location | Lift Cord Location | Location of the cord that is pulled to raise and lower the blind.
|
| |
| |
| Options |
| 2 Blinds on 1 Headrail, for oversize blinds | |
| 2 Blinds on 1 Headrail, for oversize blinds |  2 blinds or shades mounted on the same headrail. Typically this is to cover a large window where the size is too large to allow a single shade. Each blind or shade on the headrail will have its own set of controls so one blind may be open while the other is closed. We recommend splitting very large wood and faux wood blinds (over 72" wide) into two or three blinds on one headrail. If it is recommended that your blind be split you can still choose to have it manufactured as one single blind, however, it will void the manufacturer's warranty. There will be approx. 1/4" gap between blinds. Please specify the size of each blind in the notes section of the shopping cart. |
|
20.00% |
| 3 Blinds on 1 Headrail, for oversize blinds | |
| 3 Blinds on 1 Headrail, for oversize blinds |  3 blinds or shades mounted on the same headrail. Typically this is to cover a large window where the size is too large to allow a single shade. Each blind or shade on the headrail will have its own set of controls so one blind may be open while the other is closed. We recommend splitting very large wood and faux wood blinds (over 72" wide) into two or three blinds on one headrail. If it is recommended that your blind be split you can still choose to have it manufactured as one single blind, however, it will void the manufacturer's warranty. There will be approx. 1/4" gap between blinds. Please specify the size of each blind in the notes section of the shopping cart. |
|
30.00% |
| Tile or Moulding Cutout(per cutout) | |
| Tile or Moulding Cutout(per cutout) | | Procedure where a portion of a blind is cut narrower than the rest of the blind. This might be needed where there is tile or molding that narrows a portion of a window opening. Price is per cutout. |
|
$20.00 |
